2010 Toyota Camry SE Dome Light Bulbs Replacement

Rear dome light bulbs go out in cars and it's...

iFixit Library 2007-2011 Toyota Camry Moderate 20 - 30 minutes Guide 103677

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Rear dome light bulbs go out in cars and it's convenient to have them light up when needed. Simply replacing the bulbs will solve the problem and allow backseat riders to utilize light when it's dark out.

Step 1

Repair step

⌕

TOOL USED ON THIS STEP 6-in-1 Screwdriver Referenced by the iFixit guide

View item

Use one hand to push up on the roof surrounding the plastic cover and utilize a flathead screwdriver to gently pry out light fixture and cover.

Step 2

Repair step

⌕

Starting with the 2 clips on each side of the light, remove the 10 clips on the fixture.
The user should loosen every clip before removing fixture.

Step 3

Repair step

⌕

Once the clips are loose, pop off the plastic cover grey plastic cover.

Step 4

Repair step

⌕

Using hose pliers, pull out the bulb being replaced.
Now, insert new bulb by securing it into socket and pushing into place.

Step 5

Repair step

⌕

Reinstall plastic light fixture by pushing cover back into place.
Fixture should easily snap back in with proper placement.

Step 6

Repair step

⌕

Finally, test the new lights by turning them on and off a few times for 30 seconds or so to assure they work properly.
If they do not work then the next suggestion would be to check the fuse box before heading to the dealer.
Sometimes fuses blow out which can be spotted by careful analysis. If two parts of the fuse do not meet such as disconnected wires then you have a blown fuse.