2009-2013 Mazda 3 Air Filter Replacement

When working on this repair, make sure you have...

iFixit Library 2009-2013 Mazda 3 Easy 9 - 10 minutes Guide 103952

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

When working on this repair, make sure you have the correct air filter for the car. To ensure you have the correct filter, run down to your local car repair shop (Napa Auto Parts or an O'Reilly's Auto Parts), they will help you identify the correct filter. This is a quick and easy repair that will save you money.

Step 1

Repair step

⌕

Correctly identify the air filter for a 2009-2013 Mazda 3.
Go to your local car repair shop for help when buying the air filter.

Step 2

Repair step

⌕

Identify where the level is to pop the car hod.

Step 3

Repair step

⌕

After opening the hood, locate the air filter container.
It is located on the south side of the battery.

Step 4

Repair step

⌕

Identify where the metal clips are on the side of the air filter container.
Unlatch both metal clips on the air filter container to open.

Step 5

Repair step

⌕

When the air filter container is open, remove old filter.
When the old filter is removed, wipe out container with a wet paper towel.
Filter is in there tight, make sure to use a decent amount of force when pulling out.

Step 6

Repair step

⌕

Replace new filter.
It is a tight squeeze, so make sure the filter is properly fit into the container.

Step 7

Repair step

⌕

After you have replaced the new filter, close container and latch both metal hooks to close the container.