01 | XY Frame Assembly

Attributed iFixit repair guide for Zaribo Build Guide.

iFixit Library Zaribo Build Guide Easy No estimate Guide 108267

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Repair step

⌕

PART USED ON THIS STEP Blind L Brackets Referenced by the iFixit guide

View item

M8 x 40 screw for each corner. Insert T Nuts before M8 screws and do not tighten them now. Just to keep the frame in shape.
Blind L metal brackets for Z axis assembly should be inserted before M8 screws as well.
There are M8 holes for Z axis assembly on the 320mm aluminium extrusions which should be at the back of the XY Frame. Larger hole should be faced to bottom.
Insert two T-nuts for every corner in order to fasten the L brackets on the next step.
Do not forget to insert T Nuts for Y motor holder in back and LCD mount in front.

Step 2

Repair step

⌕

PART USED ON THIS STEP 3030 Misumi Extrusion Edge Cover Referenced by the iFixit guide

View item

PART USED ON THIS STEP Misumi L Brackets Referenced by the iFixit guide

View item

One Metal L Brackets for each corner.
Two M6x12 socket cap screws for each metal L brackets.
Please align the extrusions on a flat surface like glass or marble and then tighten the M8 screws on the corners and the inside L brackets.
T-Nut insert for each bottom corner.
Printed Zaribo L brackets.
Misumi rubber foot for each corner.
M6x20 socket cap screw.
Misumi 3030 aluminium extrusion edge cover.