FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

2006 (convertible) Ford Mustang Weatherproofing Car Window Replacement

Weatherproofing car window for a convertible...

iFixit Library 2006 (convertible) Ford Mustang Easy 30 - 35 minutes Guide 115344
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Weatherproofing car window for a convertible Ford Mustang 2006. This project will assist in providing a solution for people who have noticed a lot of wind noise in their car or water leaking inside the car. This guide will ensure people will have a good condition weatherproofing car window that is ready for any rain or snow or even car wash.

Step 1

Repair step

  • Driver side weatherproofing car window.
Step 2

Repair step

  • Locate the both ends of the weather stripping.
Step 3

Repair step

  • Pull down the weather stripping from the middle.
Step 4

Repair step

  • In each side of the weather stripping, you will find one plastic nail.
  • Take off these two plastic nails with your hand.
Step 5

Repair step

  • Remove the old weather stripping.
Step 6

Repair step

  • Clean any dust from where you took out the old weather stripping.
Step 7

Repair step

  • Bring the new weather stripping.
Step 8

Repair step

  • Starting from both sides, push the two plastic nails into the holes.
Step 9

Repair step

  • Push the weather stripping from the middle with your fingers.
Step 10

Repair step

  • Make sure it is aligned.