Home/ Repair guides/ 1992-1996 Ford F series-Bronco Header Panel Rep…

Official iFixit API visual reference

1992-1996 Ford F series-Bronco Header Panel Replacement

In this guide, you will need very few tools to...

iFixit Library 1992-1996 Ford F Series-Bronco Header Panel Replacement Moderate 45 minutes Guide 115819

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

In this guide, you will need very few tools to replace your header panel. This is a fast, and safe way to replace your header panel. Out of caution, before completing make sure your vehicle is shut off, and your emergency break is applied.

Step 1

Repair step

⌕

TOOL USED ON THIS STEP Phillips #00 Screwdriver Referenced by the iFixit guide

View item

Remove the 5 screws with the screwdriver to remove the grill.

Step 2

Repair step

⌕

Set aside the windshield fluid/coolant reservoir by removing the 11mm bolt.

Step 3

Repair step

⌕

TOOL USED ON THIS STEP Phillips #00 Screwdriver Referenced by the iFixit guide

View item

Remove the two screws on top of the headlight bezel, and the two 11mm bolts on the back of the bezel.
Then, remove the bolts from the housing. Repeat this step for the other headlight.

Step 4

Repair step

⌕

Remove the bolts retaining the header panel using the 8mm socket and ratchet.

Step 5

Repair step

⌕

Remove the headlight bulbs from the headlight housing by turning them counterclockwise on the retaining clip.

Step 6

Repair step

⌕

Remove the old header panel, and install the replacement panel.

Step 7

Repair step

⌕

Replace all of the bolts that retain the header panel.

Step 8

Repair step

⌕

Reinstall the headlight bulbs by turning clockwise on the retaining clip.

Step 9

Repair step

⌕

TOOL USED ON THIS STEP Phillips #00 Screwdriver Referenced by the iFixit guide

View item

Reinstall the headlight bezels after reinserting the marker lights with the two screws, and two 11mm bolts.

Step 10

Repair step

⌕

Reinstall the windshield fluid/coolant reservoir with the 11mm bolt.

Step 11

Repair step

⌕

TOOL USED ON THIS STEP Phillips #00 Screwdriver Referenced by the iFixit guide

View item

Reinstall the grill with the 5 screws.