FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

2008-2010 Audi A3 Sportback Rear Windshield Wiper Blade Replacement

The following is a guide how to replace the...

iFixit Library 2008-2010 Audi A3 Sportback Moderate 8 minutes Guide 128723
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

The following is a guide how to replace the rear windshield wiper blade on a 2008-2010 Audi A3 Sportback. The wiper that is replaced is 13 inch standard conventional wiper blade. Over time, rubber will naturally breakdown after exposure to adverse weather. When this occurs, the windshield wiper produces unusual noises like skipping, screeching or smacking, so you need to replace your wiper blades . See the troubleshooting page for this device.

Step 1

Repair step

  • Lift the wiper arm away from the windshield.
  • Slightly pull the blade away from the wiper arm to disconnect it.
  • Be sure to align the groove of the blade with the wiper arm before pressing the new blade into place.