Home/ Repair guides/ 2012 Fiat 500 Lift Support Replacement

Official iFixit API visual reference

2012 Fiat 500 Lift Support Replacement

This fast fix will break down the steps...

iFixit Library 2012 Fiat 500 Moderate 10 - 20 minutes Guide 130523

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

This fast fix will break down the steps required to replace a broken rear trunk lift support on a 2012 Fiat 500 convertible. This simple fix can be completed in about 7 to 8 steps and should take about 30 minutes to complete. The tools required are universal pliers, long nose pliers, #2 flathead screwdriver, safety glasses and gloves, and a rag for cleaning. The following steps will be taken to complete the fix:

Step 1

Repair step

⌕

Open the back hatch for your 2013 Fiat 500 and prop it open.
You want to make sure the trunk door will not close while you are repairing the lift support.

Step 2

Repair step

⌕

Open the lock from the sides.
Open the lock on up hinge and release the clevis. Open the lock on the down hinge and release the clevis.

Step 3

Repair step

⌕

Remove both locks on the new lift support.
Pull the lock outward and make sure they are not lost as they will be needed later.

Step 4

Repair step

⌕

Install the down hinge on the clevis.

Step 5

Repair step

⌕

Install the lock into the clevis.
Lock the hinge with the clevis.

Step 6

Repair step

⌕

Expand the lift support up.

Step 7

Repair step

⌕

Install the up hinge on the clevis.

Step 8

Repair step

⌕

Push the middle of the lock in.
Lock the hinge with the clevis. Then unlock the trunk door and check its workability.