Home/ Repair guides/ 2004 Toyota 4Runner Rear Wiper Arm Replacement

Official iFixit API visual reference

2004 Toyota 4Runner Rear Wiper Arm Replacement

A broken rear wiper arm is a very common issue...

iFixit Library 2004 Toyota 4Runner Easy 5 - 10 minutes Guide 132709

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

A broken rear wiper arm is a very common issue for the 2004 Toyota 4runners and can cost a lot of money when replaced by mechanics. The rear wiper arm serves a purpose when it comes to driving safety and visibility. An unfunctional rear wiper arm makes it tough for a driver to drive as they will not be able to see the vehicles coming behind them while driving due to precipitated weather. Use this repair guide to replace the broken rear wiper arm on a 2004 Toyota 4runner for a low cost!

Step 1

Repair step

⌕

TOOL USED ON THIS STEP 6-in-1 Screwdriver Referenced by the iFixit guide

View item

The plastic covering can be easily broken. Remove cautiously.
Remove the plastic covering that is hiding the screw.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP 6-in-1 Screwdriver Referenced by the iFixit guide

View item

Let the lubricant soak for a minimum of 5 minutes.
Spray/ drench the screw/ lug-nut using WD-40 to create an easy lug-nut removal.

Step 3

Repair step

⌕

Using a 10mm socket, remove the lug-nut.

Step 4

Repair step

⌕

TOOL USED ON THIS STEP 6-in-1 Screwdriver Referenced by the iFixit guide

View item

If the wiper arm is hard to remove, use a flat-head screwdriver for support.
With the lug-nut removed, gently wiggle the arm out of the socket.

Step 5

Repair step

⌕

Once the wiper arm is pulled off, clean the thread and nut to ensure that both are clear of debris.

Step 6

Repair step

⌕

Place new wiper arm in socket.

Step 7

Repair step

⌕

Using the 10mm socket, tighten the nut in place.

Step 8

Repair step

⌕

Place plastic cover back on.