2002-2007 Jeep Liberty Rear Indicator Light Replacement

The rear indicator light of a vehicle...

iFixit Library 2002-2007 Jeep Liberty Moderate 5 - 10 minutes Guide 132711

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

The rear indicator light of a vehicle communicates the driver’s intention to turn or change lanes. However, indicator light bulbs go out after years of use. Driving with a broken indicator light bulb is dangerous and often illegal. This guide will help you replace the rear indicator light bulb of a 2002-2007 Jeep Liberty.

Step 1

Repair step

⌕

Open the vehicle's rear door to access the tail light assembly.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP T20 Torx Screwdriver Bit Referenced by the iFixit guide

View item

Use the T-20 Torx screwdriver to unscrew the two screws holding the tail light cover.

Step 3

Repair step

⌕

Remove cover by pulling out and away from car.
The cover is fastened with two plastic alignment pins.

Step 4

Repair step

⌕

Twist the middle socket counter-clockwise.
Pull the socket out of the tail light assembly to access bulb.

Step 5

Repair step

⌕

Grasp the lightbulb and pull it out of the socket.