FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

2010 Mazda 3 Windshield Wiper Replacement

Windshield wipers are a very important part of...

iFixit Library 2009-2013 Mazda 3 Easy 5 - 15 minutes Guide 137335
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Windshield wipers are a very important part of a car that many people often take for granted. If you have poor windshield wipers your vision could be impaired possibly putting you in danger. While changing the wipers on your car may sound scary to some people it is actually very easy to do. One way to tell if your wiper blades need to be changed is if they are making noises or leaving streaks behind during or after operation they may need to be replaced. This guide will show you how to replace both front wipers as well as the rear wiper. Remember, when working on any car repair, to make sure the car is off and in park.

Step 1

Repair step

  • Turn on the wipers and turn off the car when they are at the apex of the arc. This will allow easier access to the wiper.
Step 2

Repair step

  • Grab the wiper and lift it away from the windshield.
Step 3

Repair step

  • Grab the wiper and rotate it 90 degrees.
Step 4

Repair step

  • Slide the wiper blade straight down away from the rubber of the blade.
  • Remove the wiper from the arm.
Step 5

Repair step

  • Take off the plastic covering at the base of the arm.
Step 6

Repair step

  • Lift up the wiper blade and rotate the wiper 90 degrees.
  • There will be some resistance, however you should not need to use a lot of force. If it does not come off easy you may be doing it wrong.