FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ Xbox Series S Wi-Fi Board Replacement
Official iFixit API visual reference

Xbox Series S Wi-Fi Board Replacement

Follow this guide to remove and replace the...

Microsoft Xbox Series S Moderate 15 - 35 minutes Guide 141300
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Follow this guide to remove and replace the Wi-Fi board on a Xbox Series S.

Step 1

Peel off the sticker coverings

Xbox Series S Wi-Fi Board Replacement — Peel off the sticker coverings ⌕
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Before you start this guide, turn off the Xbox and unplug any cables from it.
  • Use tweezers to peel off the two white screw covers located on the bottom corners of the back panel.
Step 2

Remove the back panel screws

Xbox Series S Wi-Fi Board Replacement — Remove the back panel screws ⌕
TR10 Torx Security Screwdriver
TOOL USED ON THIS STEP TR10 Torx Security Screwdriver Referenced by the iFixit guide
View item
TR8 Torx Security Screwdriver
TOOL USED ON THIS STEP TR8 Torx Security Screwdriver Referenced by the iFixit guide
View item
  • Use a T8 Torx driver to remove the two 10 mm-long screws securing the back panel to the bottom panel.
  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.
Step 3

Remove the bottom panel

Xbox Series S Wi-Fi Board Replacement — Remove the bottom panel ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Slide the bottom panel horizontally toward the back of the console until it comes to a stop.
  • This slides the clips out of the slots on the plastic case.
  • Lift straight up and remove the bottom panel from the plastic case.
Step 4

Remove the plastic case screws

Xbox Series S Wi-Fi Board Replacement — Remove the plastic case screws ⌕
TR10 Torx Security Screwdriver
TOOL USED ON THIS STEP TR10 Torx Security Screwdriver Referenced by the iFixit guide
View item
TR8 Torx Security Screwdriver
TOOL USED ON THIS STEP TR8 Torx Security Screwdriver Referenced by the iFixit guide
View item
  • Use a T10 Torx driver to remove the seven 51 mm-long screws securing the chassis to the plastic case.
Step 5

Remove the plastic case

Xbox Series S Wi-Fi Board Replacement — Remove the plastic case ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • With the bottom of the Xbox facing you, pull the two bottom-rear corners of the plastic case away from each other.
  • As you pull the corners apart, slide the back panel towards the bottom of the device. This releases the back panel from the plastic case.
  • The back panel should now settle on top of the clips on the back of the plastic case.
  • The back panel is permanently attached to the aluminum chassis.
  • Do not attempt to fully remove the chassis from the plastic case with this technique. You may risk breaking your case.
Step 6

Repair step

Xbox Series S Wi-Fi Board Replacement — repair step ⌕
  • Pull the bottom-left corner away from the chassis while swinging the chassis away from the plastic case.
  • You may need to lift the chassis to free it from the clips on the bottom-front of the plastic case during this process.
  • Remove the plastic case from the chassis.
Step 7

Remove the Wi-Fi board

Xbox Series S Wi-Fi Board Replacement — Remove the Wi-Fi board ⌕
TR10 Torx Security Screwdriver
TOOL USED ON THIS STEP TR10 Torx Security Screwdriver Referenced by the iFixit guide
View item
TR8 Torx Security Screwdriver
TOOL USED ON THIS STEP TR8 Torx Security Screwdriver Referenced by the iFixit guide
View item
  • Use a T8 Torx driver to remove the three 9.5 mm-long screws securing the Wi-Fi board to the short edge of the chassis.
Step 8

Repair step

Xbox Series S Wi-Fi Board Replacement — repair step ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use a spudger to pry and loosen the Wi-Fi board.
  • Do not pry from the bottom or sides of the Wi-Fi board as it may bend the connector.
  • Pull the Wi-Fi board straight out to disconnect it from the chassis.