2011-2017 Hyundai Accent Brake Light Replacement

If your 2013 Hyundai Accent brake light is no...

iFixit Library Hyundai Moderate 20 - 25 minutes Guide 141472

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

If your 2013 Hyundai Accent brake light is no longer working, use this guide to replace the light. The brake light alerts other drivers of whether you are slowing down or stopping the vehicle. It is important to ensure that you have a working brake light because it is a ticketable offense and for safety reasons. Before using this guide, make sure to turn the car off and to purchase a replacement bulb (Model: Sylvania 2357LL).

Step 1

Repair step

⌕

Open the trunk of the vehicle.

Step 2

Repair step

⌕

View the side flap for whichever side has the dead bulb. (This is the left side view.)
Pull the flap up and locate the brake light.
The flap may need some extra force to open because the cutouts are typically not cut all the way through.

Step 3

Repair step

⌕

Twist the socket counterclockwise to gain access to the brake light.

Step 4

Repair step

⌕

Push down slightly and twist the bulb counterclockwise to remove the dead bulb.
Pay attention to the protrusions located on the bottom of the bulb. You will need to align these protrusions with the socket when inserting the new bulb.

Step 5

Repair step

⌕

Insert the new bulb into the socket and twist the bulb clockwise to secure it into place.