FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

2005-2012 Toyota RAV4 Headlight Replacement

Headlights allow drivers to be aware of road...

iFixit Library 2005-2012 Toyota RAV4 Easy 20 - 30 minutes Guide 142236
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Headlights allow drivers to be aware of road hazards and are a warning device that indicate a moving vehicle is nearby. Eventually, headlights will burn out and need to be replaced. This guide will show you how to replace the headlight bulb on your 2005-2012 Toyota RAV4 with no tools. Be sure the car is off and the engine is not hot before working under the hood. Also make sure to engage the emergency break for an extra safety precaution before working on the car.

Step 1

Repair step

  • Turn off your car, use your emergency break to secure the car and pop open the hood.
  • Make sure the engine is not hot before working under the hood of the car.
Step 2

Repair step

  • Under the hood of the car, locate a black cable towards the grille on the drivers side that leads to the back of the headlight. The bulb is located here.
Step 3

Repair step

  • Turn the bulb counter-clockwise using your hand and gently pull the headlight out.
Step 4

Repair step

  • The headlight is attached to a plug that has a clip. Push down on the clip and pull the bulb out at the same time with the opposite hand.
Step 5

Repair step

  • Slide the new bulb into that same plug until you hear a click.
Step 6

Repair step

  • Put the bulb into the same hole that it was removed from and turn clockwise until you hear another click. You are done!