1999-2004 Honda Odyssey Coolant and Washer Fluid Check

Step 1

Coolant

⌕

• Turn off the car and pull the latch to release the hood.

Step 2

Coolant

⌕

• Pull the hood release upwards to open the hood and use the prop rod to keep it open.

Step 3

Coolant

⌕

• Locate the coolant container behind the passenger side headlight.

Step 4

Coolant

⌕

• Check the fluid level is in between the max and the min mark on the coolant container. If it is at the max, proceed to step 7.
• If the fluid level is below the max, you need to fill it up, continue to step 4.
• If the coolant tank is empty, continue to step 4
• Hot coolant is pressurized, make sure the vehicle is turned off for 15 minutes.

Step 5

Coolant

⌕

• Loosen the coolant cap a little, then step back while the pressure releases. Now, completely remove the coolant cap.
• Wait for any built-in pressure to release before completely removing the cap, pressurized coolant is hot and can scald.
• Place a funnel on top of the coolant container opening

Step 6

Coolant

⌕

• Use caution while handling coolant fluid. The product is flammable.
• Pour the Prestone coolant liquid into the container until the liquid reaches the “max” line.
• If you have a funnel. Place the funnel into the top of the container.
• Pour the coolant liquid into the funnel until the liquid reaches the “max” line.

Step 7

Coolant

⌕

• Firmly place the cap back onto the container.

Step 8

Coolant

⌕

• Close the hood.
• If doing multiple checks closing the hood is not required.

Step 9

Washer

⌕

• Locate the Washer container.

Step 10

Washer

⌕

• Open the washer fluid container and completely remove the cap.

Step 11

Washer

⌕

• Pour the Prestone washer liquid into the container until the liquid reaches the top of the container.

Step 12

Washer

⌕

• Place the cap back onto the container.

Step 13

Washer

⌕

• Close the hood.