FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ 2011 Mitsubishi Galant Window Fuse Replacement
Official iFixit API visual reference

2011 Mitsubishi Galant Window Fuse Replacement

Instead of taking your vehicle to the...

iFixit Library 2011 Mitsubishi Galant Easy 20 minutes Guide 144093
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Instead of taking your vehicle to the dealership/ repair shop, where they may charge you hundreds of dollars for the “repairs”, you could save yourself some time and money fixing it yourself following these simple steps. In this guide, we will be applying the steps to a 2011 Mitsubishi Galant.

Step 1

Make Sure that Your Vehicle is Off and in Park

No step image supplied by iFixit.
  • This is for safety.
Step 2

Open the hood of your vehicle

No step image supplied by iFixit.
  • You can do this by pulling the engine hood release lever which should be lower, to the right of the steering wheel and by the door.
  • In the middle of the front hood, pull the safety lever to release the hood. Be sure to unlatch the prop tool and support the hood with it by placing it into the hole under the hood.
Step 3

Find the fuse box.

No step image supplied by iFixit.
  • It should be on the drivers side, close to the top right.
  • Remove the fuse box cover. Keep in mind, it will have some tabs that you should push. Then you can remove it with ease.
Step 4

Search for the appropriate fuse slot.

No step image supplied by iFixit.
  • It should be a 30 Amp fuse located in position 5 of the box. You can see the fuse positions on the back of the fuse box cover you just removed or, refer to the diagram below.
Step 5

Remove the fuse and replace it with a new one

No step image supplied by iFixit.
  • Replace the old fuse with the new one.
  • Turn on the car to check and see if the windows can open and close again.
Step 6

Finish up

No step image supplied by iFixit.
  • Close the fuse box. Unlatch the propping tool and then close the hood.