FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ 2010 Chevrolet Camaro Door Handle Interior Door…
Official iFixit API visual reference

2010 Chevrolet Camaro Door Handle Interior Door Handle Replacement

Replacing the door handle of your 2010...

iFixit Library Chevrolet Moderate 45 minutes - 2 hours Guide 145908
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Replacing the door handle of your 2010 Chevrolet Camaro is necessary when the door handle becomes damaged, cannot function correctly, or wears out over time. The handle can be expensive to replace if taken to professionals to fix at a dealership. Additionally, replacing your malfunctioning interior door handle successfully can prevent being locked out of your vehicle. Replacing it yourself saves both money and time. The kits sold to replace the interior door handle make it very convenient to replace it with little to no time and minimal tools. Once you’ve finished with your replacement, make sure to test out the handle to verify that it works.

Step 1

Repair step

2010 Chevrolet Camaro Door Handle Interior Door Handle Replacement — repair step ⌕
6-in-1 Screwdriver
TOOL USED ON THIS STEP 6-in-1 Screwdriver Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Long-handled, magnetized 3 mm flathead hex screwdriver Referenced by the iFixit guide
View item
  • Remove the five bolts that connect the door panel to the door using the T30 Torx screwdriver.
  • Use a door panel removal tool to pry out the outer edges.
  • Keep in mind the door card has up to three wire bundles attached to it. Be careful when removing it! Be prepared to support it while dealing with the wires.
Step 2

Repair step

2010 Chevrolet Camaro Door Handle Interior Door Handle Replacement — repair step ⌕
  • Use your hands to sisconnect the speaker cables from the door panel.
  • Set the door panel aside.
Step 3

Repair step

2010 Chevrolet Camaro Door Handle Interior Door Handle Replacement — repair step ⌕
6-in-1 Screwdriver
TOOL USED ON THIS STEP 6-in-1 Screwdriver Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Long-handled, magnetized 3 mm flathead hex screwdriver Referenced by the iFixit guide
View item
  • Grab the replacement interior door handle.
  • Use the T30 Torx screwdriver to remove the single screw holding the original door handle in place.
  • Remove and replace the broken door handle the same as you disassembled it.
Step 4

Repair step

2010 Chevrolet Camaro Door Handle Interior Door Handle Replacement — repair step ⌕
6-in-1 Screwdriver
TOOL USED ON THIS STEP 6-in-1 Screwdriver Referenced by the iFixit guide
View item
iF
TOOL USED ON THIS STEP Long-handled, magnetized 3 mm flathead hex screwdriver Referenced by the iFixit guide
View item
  • Using the 7mm deep socket and a racketing wrench, remove the screws connecting the door panel to the handle.
  • Replace the door handle.
  • Screw the three 7mm screws back into place.
Step 5

Repair step

2010 Chevrolet Camaro Door Handle Interior Door Handle Replacement — repair step ⌕
  • Double check the connection to the door handle.
  • Inspect the new door latch to ensure it is working.
  • Check that the door is working properly.
Step 6

Repair step

2010 Chevrolet Camaro Door Handle Interior Door Handle Replacement — repair step ⌕
  • Reinstall the door panel by completing Step 1 in reverse.
  • Reconnect all the cables.
  • The interior door handle replacement functions the same as the original.
  • You have now successfully replaced a 2010 Camaro interior door handle.