FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

1995 Toyota Corolla Key Fob Motherboard Replacement

If your 1995 Toyota Corolla Controller Key has...

iFixit Library 1995-2000 Toyota Corolla Easy 5 - 10 minutes Guide 146059
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

If your 1995 Toyota Corolla Controller Key has broken or missing buttons, or otherwise damaged, use this guide to replace the key board to another, brand new shell. This shell has built in key, but there are other options with removeable keys available. Specialized equipment is required to cut the new key (if needed).

Step 1

Repair step

  • Using the Phillips #0 screwdriver, remove the single screw securing the key fob shell.
Step 2

Repair step

  • After removing the screw, remove the back cap of the key shell with a flathead screwdriver and twist the screwdriver sideways.
  • Do not lever it upwards to prevent damage to the inner board.
Step 3

Repair step

  • Carefully remove the motherboard inside the now open key without touching any of the inner metal components to prevent damage to the system.
Step 4

Repair step

  • Once you have removed the board, repeat steps 1-2 with the new key and place the motherboard on the rubber.
Step 5

Repair step

  • Place the cap back on the new key and screw everything back into place. Test the key on your vehicle to make sure that all the buttons work.