FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

2002-2006 Honda CR-V Tail Light Bulb Replacement

This guide shows the process for replacing a...

iFixit Library 2002-2006 Honda CR-V Easy 10 - 15 minutes Guide 147490
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

This guide shows the process for replacing a tail light bulb on a Honda CR-V 2002-2006, whether it is a turn signal, a brake light, or a reverse light. Bulbs have a life span and need to be replaced if fused or malfunctioning for personal and others' safety. Moreover, properly working tail lights is the legal responsibility of every driver. Replacing a tail light bulb on a Honda CR-V 2002-2006 is easy and knowing how to do it can save the driver time and a fair amount of money.

Step 1

Repair step

  • Open the trunk door.
Step 2

Repair step

  • Remove the tab covering the screws using the flat-head screwdriver.
Step 3

Repair step

  • Remove both screws using the Phillips screwdriver.
Step 4

Repair step

  • Take off the tail lamp assembly by slightly pulling the low end using one hand.
  • Slide down the lamp a little bit and pull it off using both hands to separate it from its base.
Step 5

Repair step

  • Remove the bulb socket by making a ¼ counterclockwise twist.
Step 6

Repair step

  • Remove the bulb from its socket by making a ¼ counterclockwise twist.