Home/ Repair guides/ 2012 BMW 3 Series Windshield Wiper Replacement

Official iFixit API visual reference

2012 BMW 3 Series Windshield Wiper Replacement

Use this guide to replace a broken 2004-2013...

iFixit Library 2005-2013 BMW 3 Series Easy 10 - 15 minutes Guide 147552

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Use this guide to replace a broken 2004-2013 BMW 3 Series windshield wiper. This guide will assist you in achieving your task in a straightforward and proper manner. To avoid damage, make sure you follow each step precisely for the best results. This repair procedure does not require the use of any specific tools or skills.

Step 1

Repair step

⌕

To begin, open the hood and make sure the broken wiper's body is completely positioned on the hood.
This is done to prevent scratches from developing throughout the repair process.

Step 2

Repair step

⌕

Use your fingers to pop the cover off that holds the wiper in place.

Step 3

Repair step

⌕

Use a back and forth motion to carefully remove the wiper blade from the wiper arm. and then pull it out.

Step 4

Repair step

⌕

Install the replacement wiper so that the slightly bent angle side faces the vehicle.

Step 5

Repair step

⌕

Check that the screw is aligned with the hole.
With a little pressure, slowly slide the new wiper into place.

Step 6

Repair step

⌕

Once it is positioned correctly, lock the cover to keep the blade in place.
If you hear a click, you will know you have succeeded.
Lower the windshield wiper carefully onto the windshield.

Step 7

Repair step

⌕

Finally, test your wiper blades by spraying water or windshield wiper cleaner over your windshield and turning on the wipers.
You are done if they are wiping properly. If they appear to be loose, make sure they are securely attached before driving again.