Home/ Repair guides/ 2013 Nissan Rogue Key Fob Battery Replacement

Official iFixit API visual reference

2013 Nissan Rogue Key Fob Battery Replacement

Is your 2013 Nissan Rogue Key Fob not working...

iFixit Library 2007-2013 Nissan Rogue Easy 10 minutes Guide 148684

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Is your 2013 Nissan Rogue Key Fob not working properly, or isn't working at all? It might be time to replace the battery, and while it's open, take the time to clean out the inside. Fob batteries needs to be replaced every 3 years to work at maximum range and not sporadically fail. This guide demonstrates how to replace the battery and clean out your 2013 Nissan Rogue Key Fob.

Step 1

Repair step

⌕

Slide the small tab on the back of your fob to the left.
While holding the tab to the left, pull the metal key out from the top of your fob.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP iFixit Opening Picks (Set of 6) Referenced by the iFixit guide

View item

Insert your opening pick into the small gap between the two halves of the fob and lightly pry until they separate.

Step 3

Repair step

⌕

Pull the two halves of the fob apart.
Remove the two internal housings.

Step 4

Repair step

⌕

Remove the battery.

Step 5

Repair step

⌕

TOOL USED ON THIS STEP Isopropyl Alcohol 70% Referenced by the iFixit guide

View item

Lightly saturate a cotton swab with 70% isopropyl alcohol and wipe down the inside of the shells and the rubber pad.
For any small crevices dip, the toothpick into the alcohol and clean any dirt or debris.
Avoid wiping the circuit board and any metal components.

Step 6

Repair step

⌕

Once the alcohol is dried, place a new battery into the battery housing with the proper orientation.

Step 7

Repair step

⌕

Replace the internal components and click the two halves of the fob back together.

Step 8

Repair step

⌕

Slide your key back into its housing.