Home/ Repair guides/ 2013 Nissan Rogue Key Fob Battery Replacement

Official iFixit API visual reference

2013 Nissan Rogue Key Fob Battery Replacement

If your 2013 Nissan Rogue car no longer...

iFixit Library 2013-Present Nissan Rogue Easy 6 - 9 minutes Guide 149904

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

If your 2013 Nissan Rogue car no longer responds to the keyless remote, it is most likely due to a dead battery, which needs to be replaced. I will show you how to remove the battery and replace it properly step by step. It's important to realize that 2013 Nissan Rogue is a push-to-start vehicle and in order to start the car, the key must be in close proximity. Without a functioning battery, the car will not be able to receive signals from the keyless remote to know it is in proximity to start the car.

Step 1

Repair step

⌕

Remove the key from the keyring by pulling the button on the back of the keyring from right to left while pulling the loop at the top.

Step 2

Repair step

⌕

Carefully separate the back cover from the rest of the remote.
You can use a tool to make this step easier, or you can just do it using your fingers, being very careful.

Step 3

Repair step

⌕

Carefully remove the individual pieces from inside, one at a time.
There are two pieces in total to remove.

Step 4

Repair step

⌕

Remove the battery from the remote.
Put the new battery into the remote and press down firmly to make sure it is secure.
Be sure to check that your new battery matches with your old battery.

Step 5

Repair step

⌕

Carefully snap the back cover onto the rest of the remote.

Step 6

Repair step

⌕

Put the key back into the remote.

Step 7

Repair step

⌕

Test the remote key to make sure it works properly.