1993-1998 Jeep Grand Cherokee Overhead Console Disassembly (Long Version)

Attributed iFixit repair guide for 1993-1998 Jeep Grand Cherokee.

iFixit Library 1993-1998 Jeep Grand Cherokee Moderate 1 - 3 hours Guide 151090

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Preparation

No step image supplied by iFixit.

TOOL USED ON THIS STEP Phillips #2 Screwdriver Referenced by the iFixit guide

View item

Disconnect and isolate the negative battery terminal to prevent damage to the computer.
Locate and loosen the screw holding the overhead console in place.
It is located between the thermometer/compass/trip computer module and the rearview mirror.
The 1996 model year service manual recommends not using a magnetic screwdriver to avoid issues with the compass.

Step 2

Removing the overhead console

No step image supplied by iFixit.

TOOL USED ON THIS STEP Phillips #2 Screwdriver Referenced by the iFixit guide

View item

Once the screw is loosened, push the console toward the windshield to release the clips holding it to the roof.
A metal bracket also holds the console to the roof. If the console has a slight gap from the headliner when reattaching it, locate the mounting point of the metal bracket and push upward until the metal clips snap into place correctly.
DIFFICULT PART: Locate and disconnect the wire harness from the thermometer/compass/trip computer module (red connector).