Home/ Repair guides/ 2005 Honda CBR600RR Headlight Bulb Replacement

Official iFixit API visual reference

2005 Honda CBR600RR Headlight Bulb Replacement

This guide details the process of replacing a...

iFixit Library 2005 Honda CBR600RR Easy 15 - 25 minutes Guide 151681

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

This guide details the process of replacing a worn out or damaged headlight bulb of a 2005 Honda CBR600RR. Due to this being a common issue occurring in the headlights of this particular make of the bike, it is very important to replace the bulb when damaged, as that leads to the biker being a hazard on the road, especially at night. This guide provides all the necessary steps for anyone looking to perform this particular fix or something similar. NOTE: Do not perform the procedure with the bike on.

Step 1

Repair step

⌕

TOOL USED ON THIS STEP Phillips #0 Screwdriver Referenced by the iFixit guide

View item

Turn off the bike before beginning.
Remove the bike seat by grabbing both ends and pulling the seat toward the rear wheel.
Locate the screw on the battery.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP Phillips #0 Screwdriver Referenced by the iFixit guide

View item

Use a Phillips #0 screwdriver to remove the single screw, disconnecting the power to the battery.

Step 3

Repair step

⌕

Pull the bulb's plug directly out of its port.

Step 4

Repair step

⌕

Remove the outer rubber boot by pulling it towards yourself.

Step 5

Repair step

⌕

While pushing down on the silver pin, pull the bulb directly out of its socket without turning.

Step 6

Repair step

⌕

TOOL USED ON THIS STEP Nitrile Gloves Referenced by the iFixit guide

View item

Wear latex or nitrile gloves when handling the new bulb.
Insert the new bulb into the empty socket and secure it by gently pushing it into place until properly seated.

Step 7

Repair step

⌕

Repeat the steps in reverse order to reassemble the bike, and turn it on to check if the headlight works.