DJI Mini 3 Pro Disassembly

Hi everyone, In this guide, I'll show you how...

DJI DJI Mini 3 Pro Difficult 2 - 3 hours Guide 152602

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Hi everyone, In this guide, I'll show you how to disassemble to replace the main parts of the DJI Mini 3 Pro drone. Additional Information After replacing the drone's GPS module, you will need to calibrate the drone in the DJI Fly mobile app. To replace the ESC board and drone arms, you will need a soldering iron. After replacing the motherboard, you will need to calibrate the gimbal camera. Use this manual to calibrate the gimbal camera https://youtu.be/mu03HWXplM4

The iFixit procedure is temporarily unavailable through the API.

You can still open the attributed original source safely.

Open the authorised source