Home/ Repair guides/ 2015 Dodge Charger SXT Headlight Replacement

Official iFixit API visual reference

2015 Dodge Charger SXT Headlight Replacement

Is your headlight bulb not working? This guide...

iFixit Library 2011-Present Dodge Charger Moderate 15 - 25 minutes Guide 153829

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Is your headlight bulb not working? This guide will help you replace the bulb for a 2015 Dodge Charger SXT in 10 quick and easy steps without experience using a minimum of one tool and two attachments. Probable cause: Light burnout Tools used: A Phillips screwdriver and an 8 mm socket. Note: The tools provided are the exact ones used during the repair which can be purchased from the link. Feel free to explore options. The most important is for the socket to be 8mm. It has to be compatible with the ratchet you are using to loosen the screws. Result: Headlight replaced successfully and a lot of money saved!

Step 1

Repair step

⌕

Before you begin, make sure the car is turned off and placed in park.
Pop open your hood.
This model of Charger does not require a stand to hold the hood. It will automatically hold on its own.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP Phillips #1 Screwdriver Referenced by the iFixit guide

View item

Use a Phillips #1 screwdriver to remove the three screws that secure the intake filter cover.
Slowly loosen the screws. Loosening them too quickly may result in the screw falling into the engine compartment.
Grab the intake cover with both hands and gently lift upwards.
Place the cover safely on top of the main engine.

Step 3

Repair step

⌕

Once the air intake cover is removed, the air filter can be taken out.

Step 4

Repair step

⌕

Loosen the bolt using a ratchet and an 8mm socket.
Lift the air intake compartment up and out of the engine bay.

Step 5

Repair step

⌕

Once the intake is safely removed, you can access the headlight compartment.
Remove the headlight compartment cap by twisting it counterclockwise.

Step 6

Repair step

⌕

Remove the headlight compartment by twisting it counterclockwise.
Now remove the old headlight bulb by lifting the small lever.
Use gloves or a rag to keep from touching old oils or burnt marks.

Step 7

Repair step

⌕

Connect the new headlight bulb and firmly align the bulb to the compartment.
Insert it back into the compartment and turn it clockwise to secure it.
Double check that the bulb is properly installed and connected. If it is not installed properly, you will have to remove the intake once more.
Use gloves or a rag. Do not touch the new headlight bulb with your fingers as it can damage it and lower its performance.

Step 8

Repair step

⌕

TOOL USED ON THIS STEP Phillips #1 Screwdriver Referenced by the iFixit guide

View item

Place the intake compartment back in its original place. Tighten the screw with the 8mm socket used in step 4
Place the air filter back in its place. Align it with the intake compartment.

Step 9

Repair step

⌕

TOOL USED ON THIS STEP Phillips #1 Screwdriver Referenced by the iFixit guide

View item

Using both hands align the cover with the three screws holes.
Tighten the three screws using the Phillips screwdriver.
Double check that the air intake is safely secure and not loose.

Step 10

Repair step

⌕

Power on the vehicle to ensure the headlight bulb is successfully working.