Home/ Repair guides/ 2006 Chrysler 300 Sun Visor Replacement

Official iFixit API visual reference

2006 Chrysler 300 Sun Visor Replacement

A loose or hanging sun visor is a driving...

iFixit Library Fast Fix Easy 15 - 30 minutes Guide 154231

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

A loose or hanging sun visor is a driving hazard to the driver, other people in the car, and other motorists. The visor can drop suddenly causing you to wreck your car. Fortunately, there are plenty of new and used sun visors to choose from. Just google your car’s make and model and start shopping. This guide has easy step-by-step instructions to replace that visor and make your car safe to drive. You will need a T15 Torx screwdriver.

Step 1

Repair step

⌕

TOOL USED ON THIS STEP T15 Torx Screwdriver Referenced by the iFixit guide

View item

Unscrew the 2 screws from the left side of the bracket.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP T15 Torx Screwdriver Referenced by the iFixit guide

View item

Unhook and move the visor for access to the 3rd screw.
Hold the visor. Do not let go of the visor. If you do, the weight of the visor might damage the attached wires.
Unscrew the 3rd Screw.

Step 3

Repair step

⌕

Lightly pull the wire so the connector is outside of the headliner.

Step 4

Repair step

⌕

Press and lightly pull the small tab to release the connecting wires.

Step 5

Repair step

⌕

Reconnect the new sun visor wire.
Pull down slightly on the headliner and tuck the wire back inside.

Step 6

Repair step

⌕

TOOL USED ON THIS STEP T15 Torx Screwdriver Referenced by the iFixit guide

View item

Hold the visor. Do not let go of the visor. If you do, the weight of the visor might damage the attached wires.
Align the bracket holes and screw in the right side screw.

Step 7

Repair step

⌕

TOOL USED ON THIS STEP T15 Torx Screwdriver Referenced by the iFixit guide

View item

Hang the visor on the hook for support.
Screw in the other 2 screws.