Home/ Repair guides/ 2002-2006 Acura Integra Windshield Wipers Repla…

Official iFixit API visual reference

2002-2006 Acura Integra Windshield Wipers Replacement

In this guide, I will provide step-by-step...

iFixit Library 2002-2006 Acura Integra Easy 5 - 10 minutes Guide 156026

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

In this guide, I will provide step-by-step instructions on how to replace the windshield wipers on a 2002-2006 Acura Integra (RSX). I will also provide some tips on how to choose the right wipers for your vehicle, as well as some common errors to avoid when replacing your wipers. Whether you are an experienced DIYer or a first-time wiper replacement enthusiast, I hope that this guide will provide you with the information you need to successfully replace your wipers and keep your windshield clear of any obstructing debris. Let's get started! To begin this guide, all that is needed is a towel or piece of cloth, a measuring tape, and new windshield wipers. Don't know what windshield wipers to get ? Don't worry, in this guide I've included some steps to help you choose your new windshield wipers. Before beginning, power off the ignition and engage the parking brake.

Step 1

Repair step

⌕

Use the tape measure to measure the length of the wiper blades from top to bottom.
This will help you determine the correct size of replacement wipers that you will need.

Step 2

Repair step

⌕

Lift the windshield wiper off the windshield.
Place a towel underneath the wiper to prevent damage to the windshield if the wiper is dropped.
Avoid lifting the windshield wiper too far back; doing so can cause damage to what helps the wiper stay against the windshield.

Step 3

Repair step

⌕

Lift open the clip above the wiper with one hand while holding the wiper arm up with the other.
Opening this clip will allow us to slide the wiper off for the next step.

Step 4

Repair step

⌕

Grab the wiper with one hand while holding the wiper arm up with the other.
Slide the wiper down.
Once unhooked, pull the wiper back and away from the wiper arm to remove the wiper.

Step 5

Repair step

⌕

Place the replacement wiper against the wiper arm with the hooking mechanism facing the hook of the wiper arm.
Slide the wiper up, thus putting it into place.

Step 6

Repair step

⌕

Once the wiper is slid up all the way, grab the top clip of the wiper.
Close the clip until a click is heard.
Remove the towel and lower the wiper arm down gently.