FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

1992-1996 Ford F-150 Manual Driver’s Side Mirror Replacement

This guide will assist you in replacing your...

iFixit Library 1992-1996 Ford F-series Pickups Moderate 15 - 20 minutes Guide 162637
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

This guide will assist you in replacing your side mirror if it is broken or shakes.

Step 1

Repair step

  • Unscrew the two T25 Screws located on the sides of the mirror.
  • The mirror should be bolted inside (which we will get to later), so the mirror should not fall.
Step 2

Repair step

  • Inside the door panel, there are two Philips screws. One in the panel's upper right side, the other inside the door pull. Remove both.
Step 3

Repair step

  • Turn the crank handle until the knob is facing upward. Using a hook pick or a small flathead screwdriver, gently pry open the front cover.
  • Rotating the cover out of your way, unscrew the T20 screw from inside the handle.
  • To avoid losing the screw, slide the cover back over the handle without fully removing it. However, make sure not to clamp it closed.
Step 4

Repair step

  • Three plastic retaining clips are located at the bottom of the panel. To remove those clips, either use a fastener removal tool or your hands.
  • Release the door panel from the door lock by lifting it up. To clear the door handle, move the door panel to the right.
Step 5

Repair step

  • With the panel removed. Locate the 10 mm bolt near the speaker at the top. Using a 10 mm socket, loosen the bolt.
  • Keep one hand on the mirror to prevent it from falling. This will remove the mirror from the truck.
Step 6

Repair step

  • To remove the mirror, lift up and to the left to clear the arm inside the door.