FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

2007-2012 Nissan Sentra Map Lights Replacement

This guide will show you how to replace the map...

iFixit Library 2007-2012 Nissan Sentra Moderate 15 - 25 minutes Guide 165735
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

This guide will show you how to replace the map lights of your sixth generation Nissan Sentra (years 2007-2012). Since each car has its own unique features, and while there are guides to fix others, this guide allows Nissan Sentra car owners to replace their car map lights without the risk of damaging the car parts or their vehicle. When performing this guide ensure that you are in a very well lit area to aid with visibility. Before you begin, make sure the car is off and in park. If you suspect that your map lights are out, turn them on and off a few times prior to the replacement, however, if you turned your map lights on to test them prior to beginning this guide, wait a few minutes before following the steps presented before you. This ensures that the bulb is cold, which prevents any burns or injuries.

Step 1

Repair step

  • Use a spudger or opening tool to gently pry the lens out. Begin in the small space between the lens and console.
  • You should hear a small click when removing the lens from the console.
Step 2

Repair step

  • Using the Phillips #2 screwdriver, remove the 19.1 mm screw in the middle of the console.
  • Keep both the screw and the lens, from the previous step, in a secure location. You will need them both for reassembly.
Step 3

Repair step

  • Pry the console out gently from the ceiling of the vehicle by pulling it towards you.
  • If it is too tight to get your fingers in the space, use an opening tool to pry the console away from the ceiling of the car.
  • Don't yank the console away from the opening as it is attached by connectors.
Step 4

Repair step

  • Rotate the bulb clip counterclockwise until it's loose to remove it from the console.
Step 5

Repair step

  • Gently pull the old lightbulb out of the clip.
  • Replace it with the bulb by gently pushing it in.
  • Avoid touching the bulb glass with bare hands as the oils and salts from your hands can damage the bulb and reduce the lifespan of the bulb.
Step 6

Repair step

  • Put the bulb clip back into console and turn it clockwise to secure it in place.
  • Repeat steps 4-6 afterwards for the other bulb.
Step 7

Repair step

  • Once you have repeated the same steps for the other bulb, gently place console back into its spot in the vehicle by pushing it in.
  • To ensure it is placed correctly, you should hear a small click when placing the console back into the vehicle.
Step 8

Repair step

  • Make sure to test that the lights are working.
  • Once you have done that, put the 19.1 mm screw back in place with the Phillips #2 screwdriver.
Step 9

Repair step

  • Gently place the lens back into the console.
  • You should hear a "click" when the lens is placed securely in the console.