FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

2014 Chevy Cruze Taillight Bulb Replacement

This guide shows how to replace the taillight...

iFixit Library 2008-2015 Chevrolet Cruze Moderate 45 minutes Guide 166286
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

This guide shows how to replace the taillight bulb on a 2014 Chevy Cruze. Taillight bulbs have a limited lifespan and can be expensive to replace, but are a necessity for any vehicle owner. However, it is common for drivers to not know how to replace their car’s taillights by themselves, leading them to rely on dealerships and/or repair shops to do the work for them. This can lead drivers to delay or even forgo replacing their taillight bulbs, resulting in unsafe driving practices. This guide makes it easier for 2014 Chevy Cruze owners to replace their taillights in an affordable and environmentally friendly way, without needing to rely on maintenance shops or dealerships to do it for them. Turn off the engine, engage the parking brake, and ensure that there is no risk of the car’s ignition being turned on during the repair.

Step 1

Repair step

  • Open the trunk of the car.
Step 2

Repair step

  • Remove the deck trim plug using needle nose pliers.
Step 3

Repair step

  • Pull back the trunk deck trim cover to uncover the taillight assembly.
Step 4

Repair step

  • Remove the grey plastic connector with a flathead screwdriver, gently sliding it off.
  • Unplug the taillight cable.
Step 5

Repair step

  • Open the two screw covers.
  • If the screw covers do not come open, use a flathead screwdriver to leverage them open.
Step 6

Repair step

  • Remove the two screws with a Phillips head screwdriver.
Step 7

Repair step

  • To remove the taillight assembly, first use a flathead screwdriver to pry the taillight up and slide a piece of twine beneath each side.
Step 8

Repair step

  • Once the twine is securely behind the taillight assembly, take hold of both pieces of twine and pull straight back to pop the assembly out.
Step 9

Repair step

  • Remove the bulb socket from the taillight assembly by turning it counterclockwise.
Step 10

Repair step

  • Remove the defective bulb.
  • If the bulb does not come free, use a flathead screwdriver to press against the plastic base of the bulb and leverage it out of the socket.
  • Do not press the screwdriver against the bulb itself. This may cause it to shatter.
  • Once the bulb has been removed, be sure to place it in a safe area where there is no risk of it breaking.
  • To dispose of the defective bulb, wrap it in a secondary layer of disposable packaging (such as paper towels within a plastic bag) before throwing it away.
  • Guidelines for disposing of halogen lightbulbs can vary. Be sure to double-check your local disposal guidelines before throwing the defective bulb away.
Step 11

Repair step

  • Push the new lightbulb into the socket.
  • Do not apply excessive force to the bulb.
  • Ensure that all the lights are working properly before driving the car.