Home/ Repair guides/ 2006 Dodge RAM Turn Signal Bulb Replacement

Official iFixit API visual reference

2006 Dodge RAM Turn Signal Bulb Replacement

If the blinker bulb on your Dodge Ram 2006 is...

iFixit Library 2002-2008 Dodge Ram Moderate 15 minutes Guide 167070

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

If the blinker bulb on your Dodge Ram 2006 is not flashing, it may be due to a burnt bulb. Use this guide to help replace a burnt bulb. In step two, when you pull the light casing out, wires will be attached to the case. Please do not touch the wires as they are exposed electrical wires and may cause harm to you or the cables themselves.

Step 1

Repair step

⌕

TOOL USED ON THIS STEP Phillips #00 Screwdriver Referenced by the iFixit guide

View item

Remove the two screws securing the light to the truck using an Allen wrench.

Step 2

Repair step

⌕

Pull the light casing out of the socket.
The wires exposed at the back of the light case are dangerous to touch as they are exposed electrical wires. Do not interact with them.

Step 3

Repair step

⌕

TOOL USED ON THIS STEP Phillips #00 Screwdriver Referenced by the iFixit guide

View item

Remove the four screws from the light case.

Step 4

Repair step

⌕

Remove the light case from the light bulb holders.

Step 5

Repair step

⌕

Replace the light bulb by gently pulling the original light bulb out.
Replace the lightbulb with a new one.

Step 6

Repair step

⌕

TOOL USED ON THIS STEP Phillips #00 Screwdriver Referenced by the iFixit guide

View item

Reattach the lightbulbs to the light casing and put the 4 screws back in.
Pop the light casing back into place by making sure the two pointed ends go into the holes.
Replace the two screws that secure the light to the truck using an Allen wrench.