Home/ Repair guides/ 2008-2013 Nissan Rogue Low Beam Headlight Repla…

Official iFixit API visual reference

2008-2013 Nissan Rogue Low Beam Headlight Replacement

After an extensive period of time, the bulb in...

iFixit Library 2008-2013 Nissan Rogue Moderate 15 minutes Guide 167514

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

After an extensive period of time, the bulb in a car's headlight can go out. It is important to replace the bulb as soon as possible. This will keep you safe on the road when you're driving when it's dark out, while also keeping other drivers on the road safe as well. In this guide, we will learn how to replace a Low Beam Headlight on a 2008 Nissan Rogue. This can be an easy process to go through and will save you from having to go to an automotive shop. Before starting this guide, please find a safe area to park.

Step 1

Repair step

⌕

Park the car in a safe area and turn off the engine.
Open the hood of the car by pulling the lever with the car emblem that's located at the bottom left of the driver's side.
Once propped open, use the support stand located on the interior of the hood and bring it down, inserting the support stand into the hole located on the frame of the vehicle.

Step 2

Repair step

⌕

In this case, we will be replacing the low-beam headlight on the driver's side.
Put on gloves.

Step 3

Repair step

⌕

Turn the base of the bulb half a turn, counterclockwise and pull it out.
Press the release point of the bulb up to release the bulb from the base. The bulb will slide out, allowing for an easy exchange.
Compare the new and the old bulb to confirm that they are identical.

Step 4

Repair step

⌕

Place the new bulb into the base, pressing down firmly until a click is heard.

Step 5

Repair step

⌕

Place the bulb back into the outlet the same way it was pulled out.
Turn the base half a turn, clockwise, into the outlet to put it back into the headlight.
Pull lightly on the base to make sure it is secured.

Step 6

Repair step

⌕

With the hood still up, turn your key to the accelerator (or ACC) and turn the lights on to ensure all of the headlights are working.
Close the hood slowly, making sure it is secured.
Once confirmed the light is working, your car is now safe to use on the road.