FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

1990-1993 Honda Accord EX Engine Air Filter Replacement

To make sure the engine of your 1991 Honda...

iFixit Library 1990-1993 Honda Accord Easy 5 - 10 minutes Guide 167832
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

To make sure the engine of your 1991 Honda Accord EX has sufficient airflow throughout and prevents dirt and dust from entering the engine, use this guide to replace the engine air filter. The engine air filter is a part that allows the engine to receive proper airflow. As time goes on, they will become old and dirty due to the amount of dirt and dust particles that go through the filter. An old air filter will result in less airflow which can lead to the engine stalling in the long run. If you notice the engine light on, reduced fuel efficiency, or strange engine sounds, you should consider changing the vehicle's air filter. Before starting, make sure the vehicle is completely off since it does not need to be on to replace the air filter.

Step 1

Repair step

  • Flip the switch underneath the steering wheel to open the hood.
Step 2

Repair step

  • Open the hood, and keep it in place using the prop rod.
Step 3

Repair step

  • Remove the four 1.3 cm Phillips screws from the cover of the case.
Step 4

Repair step

  • Remove the cover of the casing.
Step 5

Repair step

  • Remove the old air filter and replace it with a brand-new one.
  • Place the new air filter in the same position as the old one otherwise, you will not be able to screw the cover back on.
Step 6

Repair step

  • Place the cover back on the casing and screw it back in place.
  • Do not tighten the screws too hard or you risk the chance of breaking the screws.