Home/ Repair guides/ 2009-2015 Toyota Prius Grab Handle Replacement

Official iFixit API visual reference

2009-2015 Toyota Prius Grab Handle Replacement

So, you happened to pull on the grab handle...

iFixit Library 2009-2015 Toyota Prius Easy 15 - 20 minutes Guide 168085

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

So, you happened to pull on the grab handle hard enough for it to come loose, or maybe there has been some damage to where you need to replace it. Then when hitting a wide turn you reach for the handle to brace yourself only to be reminded that it isn't there anymore. Well, brace yourself for a simple repair/replacement process so that you can brace yourself when hitting that bend. This is a step-by-step guide on how to replace and/or install your grab handle on a 2009-2015 Toyota Prius.

Step 1

Repair step

⌕

Locate and lift the handle above the driver's or passenger's seat.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP Metal Spudger Referenced by the iFixit guide

View item

Find tabs for removal of joint cover.

Step 3

Repair step

⌕

TOOL USED ON THIS STEP Metal Spudger Referenced by the iFixit guide

View item

With a spudger, enter the tab and gently apply pressure to disconnect the joint cover from the assembly.
Slowly apply pressure away from the frame.
Notice that the joint cover is hooked on the inside. Be careful not to damage it.

Step 4

Repair step

⌕

TOOL USED ON THIS STEP Metal Spudger Referenced by the iFixit guide

View item

Repeat the steps to remove the other joint cover.

Step 5

Repair step

⌕

Remove the handle leaving behind the metal clips.

Step 6

Repair step

⌕

With a pair of pliers or with your fingers, pinch and pull on the metal clips to remove them.

Step 7

Repair step

⌕

When replacing the handles, ensure that the metal clips are pointed inward toward the manifold.
Insert until it snaps in place.

Step 8

Repair step

⌕

TOOL USED ON THIS STEP Metal Spudger Referenced by the iFixit guide

View item

Insert the joint covers diagonally ensuring the hook is not damaged.

Step 9

Repair step

⌕

Secure and test the handle.