FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ Fairphone 5 Ultra-Wide Camera Replacement
Official iFixit API visual reference

Fairphone 5 Ultra-Wide Camera Replacement

Use this guide to replace a damaged ultra-wide...

Fairphone Fairphone 5 Easy 10 - 20 minutes Guide 168831
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Use this guide to replace a damaged ultra-wide camera in your Fairphone 5.

Step 1

Prepare your phone for disassembly

Fairphone 5 Ultra-Wide Camera Replacement — Prepare your phone for disassembly ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Unplug all cables and power down your phone.
  • Press the power and volume up buttons at the same time to bring up the shutdown menu.
Step 2

Pry up the back cover

Fairphone 5 Ultra-Wide Camera Replacement — Pry up the back cover ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Insert your fingernail, or a pry tool like a spudger, under the notch at the bottom right of the back cover.
  • Pry up the back cover to release the bottom right corner clips.
Step 3

Remove the back cover

Fairphone 5 Ultra-Wide Camera Replacement — Remove the back cover ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Grip the bottom right corner of the back cover with one hand and brace the phone frame with the other.
  • Lift the back cover away from the phone to release the clips around its perimeter.
  • Remove the back cover.
  • During reassembly, align the back cover over the phone and press along the perimeter until all clips snap back into place.
Step 4

Remove the battery

Fairphone 5 Ultra-Wide Camera Replacement — Remove the battery ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Use your fingernail, or a pry tool like a spudger, to lift the battery by its tab along the bottom edge.
  • Remove the battery.
  • During reassembly, slide the top edge of the battery into its recess in the frame before pressing the battery into place.
Step 5

Unfasten the connector cover

Fairphone 5 Ultra-Wide Camera Replacement — Unfasten the connector cover ⌕
Phillips #00 Screwdriver
TOOL USED ON THIS STEP Phillips #00 Screwdriver Referenced by the iFixit guide
View item
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Use a Phillips driver to remove the 3.9 mm-long screw securing the top unit connector cover at the bottom left corner.
  • The connector cover is labeled with a "1" and a triangle pointing downward.
Step 6

Pry up the connector cover

Fairphone 5 Ultra-Wide Camera Replacement — Pry up the connector cover ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Insert your fingernail, or a pry tool like a spudger, under the notch at the left edge of the connector cover.
  • Pry up the cover to separate it from the top unit.
  • The cover is connected to the top unit by a plastic cord. Don't try to completely remove it from the top unit.
Step 7

Disconnect the top unit

Fairphone 5 Ultra-Wide Camera Replacement — Disconnect the top unit ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • While holding the cover out of the way, use a spudger to pry up and disconnect the top unit press connector.
  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend and cause permanent damage.
Step 8

Unfasten the top unit

Fairphone 5 Ultra-Wide Camera Replacement — Unfasten the top unit ⌕
Phillips #00 Screwdriver
TOOL USED ON THIS STEP Phillips #00 Screwdriver Referenced by the iFixit guide
View item
  • Use a Phillips driver to remove the six 4.9 mm‑long screws securing the top unit.
Step 9

Remove the top unit

Fairphone 5 Ultra-Wide Camera Replacement — Remove the top unit ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Phillips #00 Screwdriver
TOOL USED ON THIS STEP Phillips #00 Screwdriver Referenced by the iFixit guide
View item
  • Insert the flat end of a spudger under the screw hole along the bottom edge of the top unit.
  • Pry up to release the clips securing the top unit to the phone frame.
  • During reassembly, insert the top edge of the top unit at a downward angle into the frame before pressing it down and re-engaging the clips.
Step 10

Disconnect the ultra-wide camera

Fairphone 5 Ultra-Wide Camera Replacement — Disconnect the ultra-wide camera ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • There are small surface-mounted components surrounding the ultra-wide camera's press connector. Be careful not to pry against the components during this step, as you risk accidentally breaking them off of the motherboard.
  • Insert the tip of a spudger under the bottom right corner of the ultra-wide camera press connector.
  • Lift straight up with the spudger to disconnect the ultra-wide camera.
Step 11

Remove the ultra-wide camera

Fairphone 5 Ultra-Wide Camera Replacement — Remove the ultra-wide camera ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
  • Use a spudger, or your fingers, to lift the ultra-wide camera out of its slot in the frame.
  • Be careful to not touch the lens on the other camera during this procedure.
  • Remove the ultra-wide camera.