Home/ Repair guides/ 2009 Acura TL Windshield Wiper Replacement

Official iFixit API visual reference

2009 Acura TL Windshield Wiper Replacement

Windshield wipers are an important part of the...

iFixit Library Acura TL Easy 5 - 10 minutes Guide 169539

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Windshield wipers are an important part of the car. When they start squeaking, scraping, or leave smudges on the windshield, it is time to replace them. It is recommended that you change your wipers every 6 months depending on weather conditions. The rubber part especially tends to dry out, crack, and come off of the wiper. This guide demonstrates how to replace the windshield wiper(s) on your 2009 Acura TL. Before you begin the repair, turn off your car and put it in park to ensure your safety as you work.

Step 1

Repair step

⌕

Lift the wipers so they are in an upright position.

Step 2

Repair step

⌕

Press the clips on each side of the latch.

Step 3

Repair step

⌕

Pull the upper part of the latch up.
Slide the latch down to reveal the J Hook.

Step 4

Repair step

⌕

Slide the blade upwards to detach it from the rest of the arm.

Step 5

Repair step

⌕

Open the latch of the new wiper.
Place the J hook into the opening.

Step 6

Repair step

⌕

Insert the top part of the curve into the small slot.
Slide it down into the slot until it is secure.

Step 7

Repair step

⌕

Close the latch.
You will hear a "click" when it is secured.
Set the wipers onto the windshield and test them out.