2013-2018 Jeep Wrangler (JK) Headlight Replacement

If you find that your headlight bulb isn't...

iFixit Library 2013-2018 Jeep Wrangler (JK) Moderate 10 minutes Guide 170996

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

If you find that your headlight bulb isn't emitting light, start by ensuring it's properly connected. Follow steps 1-3 in this guide to check. If it's connected correctly and still not working, it may need replacement. This guide demonstrates how to replace it specifically for a 2018 Jeep Wrangler. Before you begin, remember to switch off your car and headlights.

Step 1

Repair step

⌕

Ensure the car and headlights are turned off.
Open the hood of your car.

Step 2

Repair step

⌕

Locate the headlight connector. It's a plastic piece attached to the back of the headlight bulb.

Step 3

Repair step

⌕

Carefully pull the headlight out from its socket. Hold the base of the bulb and gently pull straight back.

Step 4

Repair step

⌕

Unplug the old headlight from the connector. It should come off easily by pulling it away from the connector.

Step 5

Repair step

⌕

Place a new headlight into the connector where you removed the old one. Make sure it's properly aligned.

Step 6

Repair step

⌕

Insert the new headlight back into the headlight socket. Push it in until it's snug and secure.

Step 7

Repair step

⌕

Check to see if the headlight works. Turn on your car and headlights to test it.