2004-2012 Nissan Versa Windshield Washer Nozzles Replacement

Use this guide to replace the Windshield Washer...

iFixit Library 2004-2012 Nissan Versa Very easy 15 minutes Guide 176012

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Use this guide to replace the Windshield Washer Nozzles on your 2004-2012 Nissan Versa. Nozzles can fail due to normal wear and tear or be physically damaged. Symptoms of a bad Windshield Washer Nozzle include fluid leaks around the nozzle, inconsistent washer fluid spray, and visible damage to the nozzle. WARNING! WHILE OPERATING AT DRIVER'S SIDE: When removing the nozzle, do not release the hose. If it falls into the hole, it could be very difficult to retrieve. Make sure you have the replacement nozzle at hand.

Step 1

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Lift up the windshield wiper arm to work comfortably.
Insert the flat end of a spudger in the bottom of the nozzle and push, just a little.

Step 2

Repair step

⌕

Using your fingers, take the nozzle and pull it up until you can see the hose.

Step 3

A short skill to remove the Nozzle

⌕

It could be difficult to separate the nozzle from the hose. Because of that, you can use this skill. You are going to need a cloth rag and hot water.
First, set the cloth around the hose.
Next, pour the hot water over the cloth. Do not harm yourself!

Step 4

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Take out the cloth.
Using the flat end of a spudger, start to separate the nozzle from the hose.
WHILE OPERATING AT DRIVER'S SIDE: When removing the nozzle, do not release the hose. If it falls into the hole, it could be very difficult to retrieve.
Use your thumb to keep the end of the hose outside.
Make sure you have the replacement nozzle at hand.