FIXONICRemove the upper connector cover
- Remove the four screws securing the upper connector cover:
- Two 1.4 mm-long Phillips screws
- One 3.5 mm-long Phillips screw
- One 1.0 mm-long tri-point Y000 screw
Official iFixit API visual reference
Open the authorised source
iPhone 16 Plus Rear Cameras Removal
Attributed iFixit repair guide for iPhone 16 Plus.
Apple iPhone 16 Plus
Moderate
No estimate
Guide 177356
Licensed iFixit integration
This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.
Repair step
- Use tweezers or your fingers to remove the upper connector cover.
Disconnect the left edge buttons
- Use the point of a spudger to disconnect the power/Camera Control button press connector.
Disconnect the rear cameras
- Disconnect the two rear camera press connectors, located underneath and to the left of the power/Camera Control button connector.
Remove the rear camera screws
- Use your Phillips screwdriver to remove the three screws securing the rear cameras:
- One 3.2 mm‑long screw
- One 4.7 mm‑long screw
- One 2.4 mm‑long screw
Remove the rear cameras
- Use a spudger or clean fingertip to pry up the top edge of the rear cameras until you can grab them with your fingers.
Repair step
- Lift the cameras straight up, then pull them towards the top of the phone to remove them.