iPhone 16 Plus Front Camera Assembly Removal

Attributed iFixit repair guide for iPhone 16 Plus.

Apple iPhone 16 Plus Moderate No estimate Guide 177375

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Step 1

Remove the upper connector cover

⌕

Remove the four screws securing the upper connector cover:
Two 1.4 mm-long Phillips screws
One 3.5 mm-long Phillips screw
One 1.0 mm-long tri-point Y000 screw

Step 2

Repair step

⌕

Use tweezers or your fingers to remove the upper connector cover.

Step 3

Disconnect the front camera and sensors

⌕

Use the point of a spudger to pry up and disconnect the two front camera press connectors, located on the top left corner of the logic board.
The second press connector is underneath the first.

Step 4

Remove the front camera assembly

⌕

Pick up the front camera assembly and remove it from your phone.