Home/ Repair guides/ 2006 Infiniti G35 Coupe Passenger Side Door Che…

Official iFixit API visual reference

2006 Infiniti G35 Coupe Passenger Side Door Checker Replacement

Replacing the door checker on the passenger...

iFixit Library Infiniti G-Series Moderate 45 minutes Guide 179004

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Replacing the door checker on the passenger side of a 2006 Infiniti G35 Coupe is a necessary repair when your door no longer stays open or begins making loud, popping noises. This guide will walk you through the process step-by-step, ensuring a smooth and efficient replacement. Whether you’re a beginner or have some experience with car repairs, you’ll find that following along with detailed visuals and clear instructions makes this repair manageable. Using the right tools and a careful approach, you’ll have your door functioning correctly again in no time.

Step 1

Repair step

⌕

TOOL USED ON THIS STEP Flathead Screwdriver Referenced by the iFixit guide

View item

Use a Phillips screwdriver to remove the screw from the interior door handle.
Caution: Avoid applying excessive force to prevent stripping the screw head.

Step 2

Repair step

⌕

Use a trim removal tool to pry off the trim piece on the armrest.
Caution: Insert the tool carefully to avoid damaging anything
Work slowly along the edges to release each clip evenly.

Step 3

Repair step

⌕

TOOL USED ON THIS STEP Flathead Screwdriver Referenced by the iFixit guide

View item

Use a Phillips screwdriver to remove the screws hidden under the armrest trim and at the bottom edge of the door panel.
Take note of the screw lengths to ensure proper placement during reassembly.

Step 4

Repair step

⌕

Carefully pull the door panel away from the door frame to release the clips. Start from the bottom and work your way around the edges.
Caution: Do not pull too hard to avoid breaking the plastic clips.
Listen for the sound of clips releasing to ensure all are detached.

Step 5

Repair step

⌕

Carefully disconnect the door from the interior mechanism.
Label the connectors if necessary to avoid confusion during reassembly.

Step 6

Repair step

⌕

Disconnect the lock cable carefully from the interior mechanism.
Label the connectors if necessary to avoid confusion during reassembly.

Step 7

Repair step

⌕

Gently unplug all electrical connectors, including those for the window and locking controls
Caution: Avoid pulling on the wires directly; press the release tabs on the connectors.
Label the connectors if necessary to avoid confusion during reassembly.

Step 8

Repair step

⌕

TOOL USED ON THIS STEP Flathead Screwdriver Referenced by the iFixit guide

View item

Use a ratchet to remove the screws securing the speaker to the door frame and carefully disconnect the speaker and set it aside.
Handle the speaker gently to avoid damaging its delicate components.
There is no need to disconnect the speaker; it can be placed carefully to the side.

Step 9

Repair step

⌕

Use a 10mm socket wrench to unbolt the door checker from the car door frame.
Support the door while unbolting to prevent it from shifting or sagging.
Keep the bolts with the old door checker for reference during installation.

Step 10

Repair step

⌕

Reach into the access hole in the door panel to grip the door checker. Carefully slide it out through the hole.
Caution: Be mindful of sharp edges inside the door panel to avoid injury.

Step 11

Repair step

⌕

Align the new door checker with the mounting holes inside the door frame. Carefully insert it through the access hole and ensure proper positioning.
Double-check the alignment of the door checker before bolting it in place.

Step 12

Repair step

⌕

Align the bolts in the holes, then use the 10mm socket wrench to bolt the new door checker securely to the frame.
Caution: Do not overtighten the bolts to avoid damaging the door checker or its mounting points.
Test the door at different angles to verify it holds open properly without popping noises.