Home/ Repair guides/ 2013-2017 Honda Accord Low Beams Replacement

Official iFixit API visual reference

2013-2017 Honda Accord Low Beams Replacement

This guide provides step-by-step instructions...

iFixit Library 2013-2017 Honda Accord Moderate No estimate Guide 180123

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

This guide provides step-by-step instructions for replacing the low-beam headlights on a 2013-2017 Honda Accord. Over time, headlights can dim, burn out, or become cloudy, reducing visibility and compromising safety. Replacing the low beam bulbs is a straightforward process that can be completed with minimal tools. This manual will help you navigate the replacement process efficiently and safely.

Step 1

Repair step

⌕

Find the hood release lever on the bottom of the door next to the pedals or foot brake.
Pull the hood release lever.
You will hear a click when the hood opens.

Step 2

Repair step

⌕

Place your finger under the hood and find the little clip to open it.
Be careful when lifting because some hoods can be heavy.

Step 3

Repair step

⌕

Pull the securing bar and position it in place.
There will be a hole in the hood above where you can slot the bar into.

Step 4

Repair step

⌕

Find the low beams headlights.

Step 5

Repair step

⌕

Find the headlight spot.
Carefully remove the socket, keeping in mind that it is secured with a clip and can break easily if handled too forcefully.

Step 6

Repair step

⌕

To remove the clip, either pull it downward or, depending on the direction of the cable, apply backward pressure.
Turn the bulb counterclockwise and pull it off.

Step 7

Repair step

⌕

Double check the bulb number and name.
Put the new bulb in.
Check the signal and the dashboard, then turn on the car and lights.

Step 8

Repair step

⌕

After checking, turn on the lights and verify the low beams outside.