FIXONIC
SellSavedMy Fixonic
Official iFixit API visual reference

2008-2012 Honda Accord Tail Light Bulb Replacement

If you're driving and notice that one of your...

iFixit Library 2008-2012 Honda Accord Easy 5 - 10 minutes Guide 180290
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

If you're driving and notice that one of your tail lights isn't working, use this guide to help you replace the light bulb that isn't working. Having working tail lights is important because you help prevent someone getting into an accident. When you're driving, you need to have both tail lights working because you use them when you are braking and coming to a complete stop. I will be fixing the tail light of my 2010 Honda Accord. Before using this guide make sure you have the required equipment to fix this problem.

Step 1

Repair step

  • Pull on the trunk lever to open it up.
Step 2

Repair step

  • Use a prying tool to pop out the two clips.
Step 3

Repair step

  • Use your hands to pull back the plastic piece on the bottom.
  • The clip holding the plastic will pop out as well after pulling it out.
Step 4

Repair step

  • Peel back the outliner.
  • Locate the connecter for your taillight.
  • Rotate the connector 90 degrees to the left to unplug.
Step 5

Repair step

  • After turning the connector, it should pop out easily.
  • Pull out the old light bulb and insert a new one.