FIXONICBefore you begin
Reassembly steps for the main microphone in the iPhone 16 Plus.
Official iFixit API visual reference
Open the authorised source
iPhone 16 Plus Microphone Installation
Reassembly steps for the main microphone in the...
Apple iPhone 16 Plus
Moderate
No estimate
Guide 180917
Licensed iFixit integration
This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.
Prepare the adhesive
- Peel away the new adhesive strip from its white liner, keeping the blue liner in place.
Apply the adhesive
- Align the two holes in the adhesive with the three holes in the microphone, and stick it into place.
Repair step
Install the microphone
- Align the microphone with its screw holes and set it into the frame.
- Press the microphone against the bottom edge of the frame once it's perfectly aligned.
Secure the microphone
- Partially install (don't fully tighten) the four screws securing the microphone:
- One 3.3 mm‑long standoff screw
- One 1.3 mm‑long tri-point Y000 screw
- One 1.5 mm‑long Phillips screw
- One 1.3 mm‑long Phillips screw
Repair step
- Squeeze the microphone against the bottom of the frame for 15 seconds to compress the adhesive.
Repair step
- Fully tighten the four screws securing the microphone to the frame:
- Two Phillips screws
- One Tri-point Y000 screw
- One Standoff screw
