iPhone 16 Plus Loudspeaker Installation

Reassembly steps for the loudspeaker in the...

Apple iPhone 16 Plus Moderate No estimate Guide 180921

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Reassembly steps for the loudspeaker in the iPhone 16 Plus.

Step 1

Install the loudspeaker

⌕

TOOL USED ON THIS STEP Phillips #000 Screwdriver Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Standoff Screwdriver for iPhones Referenced by the iFixit guide

View item

Make sure the orange speaker gasket is fully in its slot in the frame.
Align the loudspeaker with its screw posts and set it into its recess.
Be careful not to move the orange speaker gasket during installation.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP Tri-point Y000 Screwdriver Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Phillips #000 Screwdriver Referenced by the iFixit guide

View item

Use a Phillips screwdriver to install four of the screws securing the loudspeaker:
Three 1.5 mm‑long screws
One 3.0 mm‑long screw
Use a tri‑point Y000 screwdriver to install the 1.3 mm‑long screw securing a grounding contact and the loudspeaker.
Use a standoff screwdriver to install the 3.4 mm‑long screw securing the loudspeaker.
If you don't have a standoff driver, you may use a thin flathead driver—but be careful not to strip the shallow notches in the screw heads.