iPhone 16 Pro Rear Cameras Installation

Reassembly steps to install the rear cameras in...

Apple iPhone 16 Pro Moderate No estimate Guide 181159

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Reassembly steps to install the rear cameras in the iPhone 16 Pro.

Step 1

Install the rear cameras

⌕

TOOL USED ON THIS STEP P2 Pentalobe Screwdriver iPhone Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Phillips #000 Screwdriver Referenced by the iFixit guide

View item

Align the rear camera assembly with its screw posts and place it in its recess in the frame.
Make sure the camera cables route through the channel between the battery and the logic board.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP P2 Pentalobe Screwdriver iPhone Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Phillips #000 Screwdriver Referenced by the iFixit guide

View item

Use a Phillips screwdriver to install the two screws securing the rear cameras:
One 2.9 mm‑long screw
One 3.8 mm‑long screw

Step 3

Connect the rear cameras

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

Use your finger or a spudger to connect the first rear camera connector, located on the left edge of the logic board.
Connect the second camera connector above the first connector.