iPhone 16 Pro LiDAR Sensor Installation

Reassembly steps to install the LiDAR sensor in...

Apple iPhone 16 Pro Moderate 1 - 2 hours Guide 181161

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Reassembly steps to install the LiDAR sensor in the iPhone 16 Pro.

Step 1

Install the LiDAR Sensor

⌕

TOOL USED ON THIS STEP P2 Pentalobe Screwdriver iPhone Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Phillips #000 Screwdriver Referenced by the iFixit guide

View item

Set the LiDAR sensor in the phone aligned with its screw holes.
Make sure the LiDAR sensor's cable sits flush between the battery and logic board.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP P2 Pentalobe Screwdriver iPhone Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Phillips #000 Screwdriver Referenced by the iFixit guide

View item

Use a Phillips screwdriver to install the two screws securing the LiDAR sensor:
One 1.7 mm‑long screw
One 3.0 mm‑long screw

Step 3

Connect the LiDAR sensor

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide

View item

Connect the LiDAR sensor press connector, located in the center of the logic board.