FIXONIC
Repair starts here.Sign inCreate account Live auctionsRepair HubRepair guides
SellSavedMy Fixonic
FIXONICrepair marketplace
Home/ Repair guides/ iPhone 16 Pro Max LiDAR Sensor Removal
Official iFixit API visual reference

iPhone 16 Pro Max LiDAR Sensor Removal

Removal steps for the LiDAR sensor in the...

Apple iPhone 16 Pro Max Moderate 1 - 2 hours Guide 181164
Open the authorised source
Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Removal steps for the LiDAR sensor in the iPhone 16 Pro Max.

Step 1

Remove the LiDAR sensor

iPhone 16 Pro Max LiDAR Sensor Removal — Remove the LiDAR sensor ⌕
Spudger
TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide
View item
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use the point of a spudger to pry up and disconnect the LiDAR sensor connector.
Step 2

Repair step

iPhone 16 Pro Max LiDAR Sensor Removal — repair step ⌕
P2 Pentalobe Screwdriver iPhone
TOOL USED ON THIS STEP P2 Pentalobe Screwdriver iPhone Referenced by the iFixit guide
View item
Phillips PH000 Screwdriver
TOOL USED ON THIS STEP Phillips PH000 Screwdriver Referenced by the iFixit guide
View item
  • Use a Phillips screwdriver to remove the two screws securing the LiDAR sensor:
  • One 1.6 mm‑long screw
  • One 2.9 mm‑long screw
Step 3

Repair step

iPhone 16 Pro Max LiDAR Sensor Removal — repair step ⌕
Tweezers
TOOL USED ON THIS STEP Tweezers Referenced by the iFixit guide
View item
  • Use your fingers or tweezers to lift and remove the LiDAR sensor.