iPhone 16 Pro Max Rear Camera Removal

Removal steps for the rear camera in the iPhone...

Apple iPhone 16 Pro Max Moderate 1 - 2 hours Guide 181170

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Removal steps for the rear camera in the iPhone 16 Pro Max.

Step 1

Remove the rear camera assembly

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use the point of a spudger to pry up and disconnect the first rear camera connector.
Disconnect the second camera connector underneath the first connector.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP Phillips PH000 Screwdriver Referenced by the iFixit guide

View item

Use a Phillips screwdriver to remove the two 2.9 mm‑long screws securing the rear camera assembly.

Step 3

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Be careful not to touch any of the camera lens. If you do, carefully wipe the lens with a lint-free cloth.
Insert the tip of a spudger under the top edge of the rear camera assembly.
Pry up the assembly to loosen it from the frame.
Remove the rear camera assembly.