iPhone 16 Pro Max Rear Camera Installation

Installation steps for the rear camera in the...

Apple iPhone 16 Pro Max Moderate 1 - 2 hours Guide 181171

Licensed iFixit integration

This attributed iFixit guide is displayed through Fixonic's recorded commercial API permission. iFixit remains the independent source and author of the procedure.

Guide overview

Before you begin

Installation steps for the rear camera in the iPhone 16 Pro Max.

Step 1

Install the rear camera assembly

⌕

Lay the rear camera assembly in its recess.

Step 2

Repair step

⌕

TOOL USED ON THIS STEP Phillips PH000 Screwdriver Referenced by the iFixit guide

View item

Use a Phillips screwdriver to install the two 2.9 mm‑long screws securing the rear camera assembly.

Step 3

Repair step

⌕

TOOL USED ON THIS STEP Spudger Referenced by the iFixit guide

View item

Use your finger or a spudger to press and connect the two camera connectors onto the logic board.
To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend, causing permanent damage.